"QUICK ATTACH®" TERMINALS

The Quick Attach® Fittings Page
Click above for all the fittings and to order online.

So special they have their own page!
High quality fittings for your everyday rigging use, BUT A NECESSITY IN AN EMERGENCY AT SEA! These are truly unique mechanical fittings for all your wire and rod needs. The latest generation in patented mechanical fittings. The SIMPLEST, SUREST, AND SAFEST way of attaching wire or rod on the market today! "Quick Attach®"

Here's the very latest generation in patented mechanical fittings for all types of wire rope and rod. Specially developed for marine, industrial and Navy/Coast Guard use, they can be assembled in less than a minute. One model per size will fit all wire construction: 7x19, 7x7, 1x19 and Dynaform® wire ropes, as well as rods of a given diameter.

Special attention has been placed on the strength of the terminals, which guarantees that the wire will always break before the fitting even gets distorted! Patented wedges firmly grip the wire rope or rod. Fittings and wedges are fully reusable.

"Quick Attach®" fittings are precision machined from 316 stainless steel and
LLOYDS OF LONDON APPROVED under #88/0279 for holding power of at least 90% of the maximum breakload of the wire rope used. Many tests achieved as much as 98% of the theoretical wire rope strength.

Quick Attach®" fittings, available in all sizes, are also recommended for installations where the final length of the wire cannot be determined in advance, since they allow adjustment to correct length during assembly.

See what Good Old Boat magazine has to say about them.

It's so easy! Just 3 steps!

STEP 3 Insert stainless sleeve and reassemble "Quick Attach®" fitting. Slide the stainless sleeve supplied with the kit over the end of the wire. Screw the two parts together and tighten.You're done!

For more detail assembly instructions click here .